Our Model H unit enables high-volume micro-blasting in any environment, from laboratories to production lines.
Description
Features
- Patented vibratory feed system for uniform media flow and precise control
- Intermittent or continuous duty capability
- Heavy duty construction
- Pinch valve shutoff with wear detector
- Long life fittings at critical wear points
The Airbrasive Model H gives high volume producers the ability to micro-blast parts on production lines or in labs. This sturdy machine has been designed to accommodate both intermittent (foot switch activated) or continuous operations.
Powder flow lines are reinforced with tungsten carbide fittings for the utmost reliability in a continuous operation. It utilizes our patented vibratory feed for uniform powder flow. Powder flow is adjusted via our powder flow and pressure controls on the front panel.
Added to this machine is an auxiliary powder chamber monitored for powder level. Once it falls below a certain level, an indicator light tells the operator to fill the auxiliary chamber with powder. This guarantees consistent powder flow for continuous operation.
Specifications
- Voltage: 110V, 60Hz or 220V, 50Hz
- Current: 1 amp
- Pressure: Up to 140 PSIG
- Minimum line press: 50 PSIG
- Air Supply: 5 scfm (2.4 L/sec)
- Chamber Capacity: 4 lbs. (1.8 kg) of powder
- Powder Flow: Up to 40 grams/min
- Orifice plate: 8 holes x 26 mil dia. (0.7mm)
- Relief Valve Setting: 140 PSIG (9.8 kg/sq.cm)
- Dimensions (H x W x D): 22-1/2″ x 14-3/4″ x 9-5/8″ (57.2 cm x 38.0 cm x 25.0 cm)
- Weight: 60 lbs. (27.2 kg)
Accessories
Standard Accessories
- Foot switch and 6 ft of hose
- Handpiece and 6 ft of hose
- Air Supply Hose (5 ft)
- Nozzle (0.18” ID, straight)
- Nozzle (0.18” ID, right angle)
- AccuBRADE 27 Aluminum Oxide Powder (27 micron, 4 LBS)
- AccuBRADE 50 Aluminum Oxide Powder (50 micron, 4 LBS)
Recommended Accessories
- Work Chamber, 110V or 220V
- Dust Collector, bag type or cartridge type, ¾ HP, 110V or 220V
- Air / Oil Filter
